Model	OPT-LPE2-040-01
Reference Distance(CD)	406mm
Z-axis Range(FS)	354.465mm
X-axis Width Near End	168.669mm
X-axis Width Standard	223.598mm
X-axis Width Far End	331.221mm
Z-axis Repeatability	5 μm
X-axis Repeatability	18 μm
X-axis Data Interval	53-104 μm
X-axis Profile Points	3200 points
Z-axis Linearity	±0.03% * FS
Scanning Speed(Frame Rate)	2000–18000 Hz
Laser Wavelength	405 nm
Laser Safety Class	Class 2
Laser Output Power	6 mW
Dimensions (mm)	202.5x96x53
Weight(kg)	1.236
Operating Temperature	0-50°C
Storage Temperature	-20-70°C
Operating Humidity	35%~85%,No condensation
ESD ProtectionESD	Contact discharge 4kV,air discharge 8kV,up to IEC61000-4-2 standard
EFT ProtectionEFT	Power port:2kV/5 or 100kHz;signal port:1kV/5 or 100kHz,up toIEC61000-4-4 standard
Vibration(Environmental Durability)	Frequency 1-2500 Hz, max amplitude ±25.5 mm, max velocity ±2 m/s, RMS acceleration 3 g, 2 hours random vibration in X, Y, Z directions
Enclosure Protection Rating	IP55, compliant with IEC60529
Typical Power Consumption(W)	17.5 W (24 VDC full power operation at room temperature)
Power Supply Requirements	24 VDC power supply
I/O Interface	2 optocoupler inputs, 3 optocoupler outputs
Supporting Software	3D sensor client software OPT LPViewer, supporting algorithm platform software Smart3
Operating System Requirements	Windows 7/10 32/64-bit, Windows 11 64-bit (recommended 8 GB RAM, i5 or equivalent processor)
Secondary Development System Support	Linux/Windows